Skip to content
Cleaning crews on call around the clock Open 24/7 (972) 779-6296
Commercial Cleaning Balch Springs logo
Empty office with bright lights and a glossy floor

Tile floor specialists

VCT Floor Stripping, Sealing & Waxing in Balch Springs, TX

Old finish taken off to bare tile and rebuilt properly, by the same crew that maintains it afterward.

Restoring VCT Is What We Do Best

Composition tile carries more foot traffic in this region than almost any other commercial surface: school corridors, church halls, clinic waiting rooms, store aisles. The tile is tough. The shine is not the tile, though. It is the finish, and finish is sacrificial. Every scuff, every gritty shoe and every wrong mop chemical takes a little off, and soil gets sealed between layers until the floor goes amber. Commercial Cleaning Balch Springs has 38 years in business, and tile refinishing has run through all of it. A proper job starts with clearing the room and taping off what must stay dry. Stripper gets applied at the right dilution and agitated with a swing machine until the old coats emulsify. That sludge is wet-vacuumed off and the tile is rinsed, sometimes twice, until a neutralizing rinse leaves it bare and clean. Edges get scraped and hand-scrubbed. Once dry, a sealer goes on, then a build of thin finish coats with full drying between each. A high-speed burnish closes the job. What many companies skip comes next: an upkeep plan. Our nightly crews use finish-safe cleaners and burnish on a schedule, which keeps that gloss far longer between strips.

Every Step of a Proper Strip and Wax

Cut any of these and the floor looks tired again within weeks.

  • Room prep

    Furniture cleared, edges taped, caution signs placed.

  • Chemical strip

    Stripper agitated by swing machine until old coats emulsify.

  • Sludge recovery

    Emulsified finish wet-vacuumed off, tile rinsed and neutralized.

  • Edges by hand

    Baseboard lines and corners scraped and scrubbed.

  • Sealer

    A base layer that anchors the build and protects the tile.

  • Finish build

    Thin coats laid one at a time, with full drying in between.

  • Burnish

    High-speed pass that densifies the surface and lifts the shine.

  • Upkeep schedule

    Periodic burnishing and finish-safe mopping to delay the next strip.

How a VCT Job Is Run

  1. Read the floor

    Finish condition, square footage, cracked tiles and furniture load, seen in person or described by phone.

  2. Book a closed window

    A written price and a closed-building slot, late night or weekend, so no foot touches wet finish.

  3. Refinish, then protect

    Strip, seal, build and burnish, followed by burnishing on your regular calendar.

Why Floor Managers Choose Us

  • 38 years in business

    Tile work has been on our schedule for the full 38 years the company has operated.

  • Upkeep by the same crew

    Finish-safe mopping and planned burnishing guard the new floor.

  • Our own machines

    Swing machine, wet vac and burnisher arrive on our truck.

  • Strip to bare tile
  • Sealed and rebuilt
  • Burnished gloss
  • Upkeep plan

Is Your Tile Ready to Shine Again?

Share the footage and how the finish looks today. Pricing for the job and the upkeep follows.